Customer faced a serious issue on TMS570. Details are: DMA+MIBSP are used to connect with external SD card. 1) When TMS570 internal RAM datas are sent to SD card through DMA+MIBSP, and then read again ...

The CircuitCo Audio Boosterpack for the TM4C123 Launchpad that is referred to in the book 'Digital Signal Processing using the ARM Cortex-M4' never went into full-scale production. I have just ...

we have a microelectronic system which draws power from the REG1 configured to supply 3.3V when the battery pack is connected. However, when the battery pack is not connected, we will supply 3.3V from ...

The following two ISRs have different PIEACK clearing methods. Writes of 0 are ignored in PIEACK registers and hence both the methods are doing the job. Method 2 is better as method 1 is doing ...

How do you run the flash frequency test in CCS v4? In "F28335 Flash Settings", I can set the clock configuration and GPIO, but there is nothing there to let me perform the frequency test.

I have tried the simulation file of UCC28730 available from TI website using Pspice V16 . After 1.09msec, the pulse from DRV pin stops. So that the output is not reaching the expected value. We tried ...