I am experiencing a few issues with malloc. The problem seems to occur only after I apply the code optimizer at level 4: "whole program optimization". The resulting ...

Because I'm using a LP board to test my application I bought an XDS110 (TMDSEMU110-U) to program and debug my custom board. After connecting the debugger to the PC (Windows 10) it installed the ...

I have tried the simulation file of UCC28730 available from TI website using Pspice V16 . After 1.09msec, the pulse from DRV pin stops. So that the output is not reaching the expected value. We tried ...

we have a microelectronic system which draws power from the REG1 configured to supply 3.3V when the battery pack is connected. However, when the battery pack is not connected, we will supply 3.3V from ...

My customer wants to use PCM2906C but I found a thread saying it's not UAC 2.0 compatible. Do we have any similar devices that are compatible with UAC 2.0?

Other Parts Discussed in Thread: LMH1218, Custorm use LMH1219 two outputs: CH1 connect to display, CH0 connect to LMH1218(output by BNC). When 3G/6G，LMH1219 two outputs are ok. When 12G, LMH1219 CH1 ...

The following two ISRs have different PIEACK clearing methods. Writes of 0 are ignored in PIEACK registers and hence both the methods are doing the job. Method 2 is better as method 1 is doing ...