2005年4月17日 · The 1000.2 dish will get a good signal on all 3 satellites, but 129 will always be the lowest of the 3 for a couple of different reasons. It is nothing to worry about. 110 and 119 …

2006年2月9日 · No problem. I should add I usually see around 50 for most transponders on Nimiq5 on my "official" Dish HD system. That is the dual LNBF system that was installed by …

2004年3月9日 · As for the DISH 500 vs DISH 1000 thing, not sure about the original 1000, but my 1000.2 can get just as good, and better signal strength than my 500 did. Granted, my 1000.2 …

2011年1月18日 · Appreciate the reply,my only concern was since Dish Network's 1000.4 WA.4 LNB dish is relatively new in the WA,and has more adjustments for tweaking the dish they …

2018年10月7日 · I want to put Dish Satellite TV signal and OTA Antenna signal on common RG-6 cable runs. Something like the diagram below (also attached). Is this possible to put both …

2013年4月29日 · So I bumped into the dish slightly and ever since then I noticed I get a glitch about every 15 or 20 minutes in my signal mainly on the 4K Joeys. The Hopper 3 seems like it …

2006年2月14日 · Having a weird problem for the last 3-4 weeks. For some reason, many of my channels drop out at night - I get the message that the satellite signal has been lost. It seems …

2018年7月12日 · 4. Wait about 1 minute 15 seconds for the Receiver to boot up and the “acquiring signal 535” screen to pop up. 5. As soon as the “acquiring signal” screen pops up …

2024年1月21日 · Check connection then test signal. If you are on 119/110 satellites you want to be high 50s to low 70s depending on location and if on the 72.7/61.5 then you want to be 50 …

2020年12月19日 · Sam_gordon, there is absolutely no signal on the signal strength meter bar regardless of how I peak the dish etc. Here is a reason I think it may be a receiver issue: I took …