2010年11月25日 · The Craftsman have been a good router, as far as I have seen. The combo That You have should be a good buy. I have the sears router, and have had good luck. One of the first routers I bought in the late 60''s or earily 70's is still ready to route. I have an old router table that is about 18"x 18" and I haven't had good luck with that. It is old.

2010年1月3日 · One directly under the router and one on the very bottom. There are holes pre drilled so that the end user can enclose it if desired as well. All in all it was good for me because I needed a router with a 1/2" chuck as well as a spare router to free hand and use with dove tail jigs and such. But I wouldn't go out and buy the table.

2007年8月4日 · The Craftsman combo comes with the 1/4" and the 1/2" collet nuts,,,because the router is new take the nut all the way off the router and place in the bit you want to use, push the bit in the but just so the base of the bit comes out of the botton of the collet nut then screw it back on the router then crank it down.besure to push in the lock pin.

2006年11月26日 · I suggest you purchase at least a 2-1/4 HP model in a combo kit since this has the power needed to work with hardwoods and for most applications. As far as I know all Craftsman routers still use the plastic Craftsman style guide bushings, and these are of …

2008年2月26日 · Yes,,,,, BUT I would suggest a combo set in that way you have the best of both worlds.....the Sears Craftsman 2 HP VS,soft start,and you adjust the router height from the top of the table with a long Allen Hex Key , all for about 100.00 bucks.

2009年6月16日 · 90 degrees is normal for the adjustment locking lever. There may be crud between the router motor and base. Cleaning and wiping dry should take care of this. Some of the models need adjustment, a few have ball bearings which love to take flight. I would take the router to Sears and ask for assistance with it.

2008年3月1日 · Mostly using the fixed base locked into my 'router table'- which is a extra leaf I made for a workmate that it fits into. What I'd been doing is just zeroing it out on a surface and then using the fine adjustment knob to set height. It works fine, but is a bit 'klugey'. But other than that the router combo kit has been really good.

2013年3月21日 · However, I was thinking about getting the $120 Craftsman router + table combo from sears. (1 3/4 hp fixed router with 334 Square Inch Table Top) Its hard to beat for the money and just to get a couple small projects done until I can upgrade.

2006年1月17日 · Just a update on the CraftsMan Router Combo Set Just one user review It's GREAT and I'm impress ,it will take on the PC template guide steel or brass,if you mount the base in a router table you can use a Allen Hex Key to (T-Type Allen Hex Key) move it up or down from the top side of the router table via. a small 1/4" hole in the router base plate and the router …

2005年8月18日 · awhile back i bought the router/router table combo through sears. i figured it would be a great beginner table. anyways, as i have posted threads about my router screws getting stripped, I AM IN NEED OF ANYONE THAT COULD GUIDE ME IN THE DIRECTION OF WHAT SIZE OF SCREWS THEY ARE.