2015年7月2日 · If the ice level control board fails, the ice maker will stop making ice. Water Filter. How it Works: If the refrigerator ice maker is not working the water filter might be clogged. Try changing the water filter. Icemaker Mold Thermostat. How it Works: If the ice maker is not working the icemaker mold thermostat might be defective.

Reset a Kenmore Ice Maker. Remove the front plate that covers the ice maker. The cover plate should come off with a simple tug. Find the on and off switch on the front of the ice maker's PC board and turn the machine off. Unplug the refrigerator and wait five minutes before plugging it back in. Turn the ice maker back on and return the cover plate.

2015年4月1日 · If the ice maker is not working the icemaker mold thermostat might be defective. Inside the control module of the ice maker is a thermostat which monitors the temperature of the ice mold (ice tray). Once the mold reaches the proper temperature the ice maker starts a harvest cycle by ejecting the ice cubes and refilling with water.

2018年12月11日 · Remove the ice bin and locate the slot the energizing lever would engage located on the tray that makes the ice cubes. The slot contains a slider which should be in the low/down position when cubes are desired. If it is in the upper position the ice maker will only produce crushed ice and will not response to commands for cubed ice.

2021年12月29日 · Mine has this problem. Every time you open & close the door, the wires flex, eventually breaking. Internal diagnostics don't detect this problem. You can check voltage across the main power wires (black & white) going into ice maker. I have 0 volts at ice maker and 120 VAC at the wire harness terminal under the kick plate.

2023年8月2日 · If your ice maker is making ice but won't trigger automatic harvest cycles then it's likely your points have too much carbon buildup. Each time your machine dispenses ice a spark jumps across the switch. After hundreds of sparks, the contacts are properly charred. To diagnose this issue, initiate a manual ice harvesting cycle.

2011年2月25日 · I'm having a similar problem. The icemaker works fine, as I've emptied the ice box and had it fill up again. But the dispenser itself won't release any ice. It's not stuck and the water dispenser works fine. I also don't hear the rumbling of a motor like I did before when the ice pedal is pressed. The model is 106.55606400

2012年7月3日 · I have a Kenmore Coldspot model 106.55502400. The icemaker stopped making ice. The water to the door works just fine. I replaced the actual icemaker and still no ice. I replaced the water valve (solenoid) and made sure the lines are clear. No ice. What next? I am beyond stumped. Any help is greatly appreciated.

2023年1月19日 · I have had a service call three times to replace the water valve due to no water flowing to my ice maker. It's not making the humming noise and no water is flowing to the ice maker but water does flow to the water dispenser. Problem is no water flowing to ice maker on my Kenmore Elite - Kenmore side by side refrigerator

2024年7月18日 · If the ice maker is not working, the ice maker mold thermostat might be defective. Inside the control module of the ice maker is a thermostat which monitors the temperature of the ice mold (ice tray). Once the mold reaches the proper temperature, the ice maker starts a harvest cycle by ejecting the ice cubes and refilling with water.