Early history
In 1405, Konrad Kyeser described a diving dress made of a leather jacket and metal helmet with two glass windows. The jacket and helmet were lined by … 展开

Two basic systems of attaching the helmet to the suit were in common use: In one style the perimeter of the corselet was clamped to a rubber gasket by up to 12 bolts, using brass brails to … 展开

The standard diving dress requires an assistant to help with dressing in and out. The cuff seals need an assistant to hold them open to remove the hands. Where lacing is needed, the diver cannot comfortably reach the laces. The corselet seal, fitting of the bonnet … 展开

Most of the hazards to which the standard diver was exposed are much the same as those to which any other surface supplied diver is exposed, but there were a few significant exceptions due … 展开

Standard diving dress can be used up to depths of 600 feet (180 m) of sea water, provided a suitable breathing gas mixture is used. Air or other breathing gas may be supplied from hand … 展开

A few accessories were produced that are specific to Standard diving dress, though similar items are available for other diving systems.
Welding visors were made that clamp over the front viewport of the copper helmet. These would have to be … 展开

• Water entry and exit was usually either by a substantial ladder or by lowering the diver into the water and lifting him out on a small platform with handholds known as a diving stage. In earlier days less ergonomically desirable methods have been used, like 展开