Clean area around the OIL FILLER CAP (5) with cloth and unscrew the cap by turning it counterclockwise

2024年2月22日 · Most Common Reasons Why Worx Electric Chainsaw Oiler Not Working 1. Oiler Pump Not Working. The oiler pump is responsible for sending oil to the chain. If the pump is …

Possible cause: No oil in reservoir. Do not overfill. Oil levels will be shown through the OIL LEVEL WINDOW (14).

It's normal for a saw to slowly drip oil after it has been used. The reason for this is because the bar, chain, and sprocket area are covered in oil as the chain spins. After the saw is turned off, …

DO NOT OVERFILL. Oil levels will be shown through the OIL LEVEL WINDOW (14). Avoid getting dirt or debris in the oil tank.

5 Steps to Fix a Worx Chainsaw Oiler. 1. Check the oil level: If the oil level is low, add more oil to the reservoir. 2. Clean the oil filter: The oil filter can become clogged with sawdust and debris, …

If there is no oil pattern, IMPORTANT: The chain saw is not despite a full oil reservoir, contact WORX filled with oil. It is essential to fill customer service agent or WORX approved with oil …

The chain saw is not supplied filled with oil. It is essential to fill with oil before use. Never operate the chain saw without chain oil or at an empty oil tank level, as this will result in extensive …

[FAST, CLEAN CUTS] This cordless 20V PowerShare chain saw is as fast and powerful as anything in its class. And with no gas and no cord, there’s much less muss and fuss. Please fill …

Find the most common problems that can cause a Worx Chainsaw not to work - and the parts & instructions to fix them. Free repair advice!