Table 1 lists the recommended analytical wavelengths and estimated instrumental detection limits f or the elements in clean aqueous matr ices. The instrument detection limit data may be used to estimate instrument and metho d per formance for other sample matrices.

Method 6010B, Revision 2 (1996) (PDF) (25 pp, 167 Kb) INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY. Method 6010C, Revision 3 (2007) (PDF) (34 pp, 84 Kb) INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY. Method 6020, Revision 0 (1994) (PDF) (18 pp, 207 Kb) INDUCTIVELY COUPLED PLASMA - MASS …

Both methods allow for calibration with a blank and 1 standard, but must verify each wavelength used at higher end of the LDR (200.7, 9.2.2 & 6010B, 7.2.4). Calibrate as usual. Analyze succeeding higher standards (min. of 3). Recovery must be at least 90% of the true value.

EPA Method 6010 is a performance-based method for determination of trace elements using ICP-OES. The method has gone through a series of updates—from EPA 6010, 6010A, 6010B, 6010C, and in July 2014, to 6010D Update V. It is usually best to use the most updated version due to rapidly changing technology.

Question: Should sample duplicates or sample spike duplicates be performed when using ICP AES Method 6010B? Answer: Sec. 8.4 of Method 6010B details the frequency of sample duplicates and matrix spikes.

This requirement applies to all TCLP inorganic analytes and the methods used to determine those analytes, including ICP Method 6010B. Generally, most samples will not have to be analyzed by MSA, given the criteria listed in the method.

US EPA method 6010 has been validated for the ICP-OES analysis of 31 metal elements in various environmental matrices. Method 6010 specifies quality control criteria for calibration validity, linear dynamic range, and method detection limits.

Method: ICP, 6010B & 200.7 SOP Revision No. 6 Date: February 10, 2000 Page 3 of 34 1. INTRODUCTION AND SCOPE This SOP describes the simultaneous multielemental determination of elements by ICP. The method is applicable to drinking water, groundwater, waste water, TCLP extracts, soils, sludges, sediments and other solid wastes. Table 1 lists the ...

This document comes with our free Notification Service, good for the life of the document. This document is available in either Paper or PDF format.

2015年10月21日 · Table 1 lists the recommended analytical wavelengths and estimated instrumental detection limits for the elements in clean aqueous matrices. The instrument detection limit data may be used to estimate instrument and method performance for other sample matrices.