A tip: buy the Toyota oil filter wrench - PriusChat
2006年12月10日 · NAPA also sells a cheap metal 65/67mm dual-use end-cap wrench (BK 7759010, $3.99) which I suspect is the bad NAPA wrench that's "just a hair too large" to which the OP refers. However, NAPA sells another, more expensive, metal, 65mm only, end-cap oil-filter
Correct Size OIL FILTER CAP WRENCH for 2007 - PriusChat
2007年6月4日 · NAPA 65mm End Cap Oil Filter Wrench #13 rudiger, May 16, 2007. Peter Senich Junior Member. Joined: Dec 6 ...
Prius Oil Filter Removal Tool (Socket) - PriusChat
2006年7月4日 · The best-fitting, highest-quality, metal end-cap oil filter wrench I came across was at NAPA, but at $8.79, it was pricier than most: NAPA End-Cap 65mm Oil Filter Wrench The metal ones at some of the other auto parts chains fit nearly as …
Oil Filter Wrench - PriusChat
2008年12月13日 · I suggest that you bring the replacement oil filter with you when shopping for an oil filter wrench. I have three: a cap wrench (which can slip if the filter is on very tight), a wrench that has three fingers (which also can slip if the filter is on too tight) and a band wrench made for small filters (which works best when the filter is on tight, but service clearances are …
Gen III oil filter wrench | PriusChat
2009年7月8日 · I changed my oil earlier this week and used my Wal-Mart el-cheapo plastic 65 (or so) mm wrench that always worked good on the canister filters used on my Gen2. The next day I ordered a 64 mm, part number TOY640, oil filter wrench and bought a 24 mm socket to fit on it.
Oil filter wrench - PriusChat
2010年8月18日 · I've been using a semi-standard hex oil filter wrench on the Prius with relatively good results. Until this last time. Took the car to one of these quickie oil change places. They, with their tools, couldn't get the oil filter off, and that was with 15 minutes of trying. Took the car home, felt frustrated, and tried to do it myself.
oil filter wrench - PriusChat
2012年1月5日 · In order to change the oil filter element in the 2012 Prius v (lowercase v for the Prius v), folks have told me that I need a 64mm wrench (TOY 640), or a 74 mm wrench (TOY 740), or just a regular socket wrench (maybe 14 mm) to remove the filter casing.
oil filter wrench??? | PriusChat
2012年6月3日 · I've own this Lisle filter wrench for nearly 20 years. It still works for removing the stubbornest and tightest metal canister filter. Toyota OIL FILTER WRENCH Part Number 09228-06500-02 The harder that you turn the wrench counterclockwise; the tighter it grips. I've NEVER not been able to remove a filter using the wrench.
Official (OEM) Toyota Prius 2016 (Gen 4) oil-change instructions
2016年3月4日 · The most important thing is to have the right oil-filter cap wrench. It's very hard to find a good one and Toyota doesn't actually sell one. I was lucky that I had found a good one years ago. It's the same cap wrench that fits on the most common Toyota spin-on filters, such as for most pre-2008 Corollas.
Oil Filter Wrench Size for Gen 1 2001 - 2003 | PriusChat
2020年5月16日 · I did find in the manual there is oil filter wrench with part number 09228–06501 0922806501 - Oil filter wrench - Genuine Toyota Part Toyota doesn't mention the size or flutes but searching around. It seems like 64mm or 64.5mm and 14 flutes. This seems similar to other generation priuses.