Tapering jig makes repeatable and consistent tapered legs. #shopjigs #tapering #taperingjig #powertools #woodworking #kjsawdust | KeithJohnson_CustomWoodworking

MICRODIAL Tapering Jig

“Making a straightening (or tapering) jig for the @harveyindustriesintl table saw. Wouldn’t be possible without @microjig dovetail clamps. Very slick.” - video/post by @jlmwoodworks | Microjig

Step by Step 👇🏻 This taper jig for the miter saw is super easy! 1. Cut the base for the jig to size. 15” length x 17” wide. I just used a scrap piece of MDF. 2. Cut the two smaller scrap pieces to size. The top piece that sits on the miter saw fence is 17.5” long and 2.5” wide. The piece that sits close to the saw blade is 20” long and 2.5” wide. 3. Attach the top piece first, leaving 5 inches of overhang on the left side of the jig. Glue and screw from the bottom. It helps if you countersink

Fourside tapering jig

No jointer? No Problem! You can make a jointing jig for your table saw easily! Plans linked in comments. Just use a dovetail router bit with dovetail clamps. You can also use this as a tapering jig. Great little woodworking project! #woodworking #woodworkingtips #diy #hacks | 731 Woodworks

When it comes to cutting Tapers…there’s nothing better I’ve used than my @microjig taper jig! Designed to pair with your already owned push block, it makes cutting repeatable tapers safe and easy! #woodworking #tapers #microjig #woodshop #jigs #fixtures | M2 Lumber